Prices & Booking

 

 

What are your thoughts on What Would Cause My Electric Water Heater to Stop Working??

Lots of contemporary houses take advantage of an electrical water heater for their furnace, because of its ease as well as ease of use. Nevertheless, just like any other electrical appliances, issues might occur with its use, suddenly. It can be really irritating to wake up to a cool shower rather than a warm one or having your bathroom with water that isn't hot sufficient or even also hot. Whatever the instance may be, hot water heater issues can be fairly stressful. Fortunately, we have actually made a checklist of possible remedies to your water heater concerns. There are a number of variables that might create a number of these troubles, it could be a concern with the power supply, the electrical burner, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for security. Whatever the problem is, getting it taken care of should not position excessive of a concern if you follow these steps:

 

Inspect Your Power Supply:

As standard as this may seem, it is extremely essential. Without adequate power, your water heater will not work. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the breaker stumbled. If the circuit breaker is the issue, just transform it on and off once more. Change any broken or worn-out fuse. Check the device with power after these adjustments to see if it's currently working.

 

Check the Heating Element in the Water Heater:

If it's not a power issue, after that attempt looking into your heating element if it is still working. Check each of your burner to be sure the problem isn't with any of them. If any one of them is damaged, change that part and then inspect whether the warm water is back on.

 

Examine Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't hot enough, you may require to examine the temperature level setups on your upper thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open up the accessibility panel and press the red button for temperature reset above the thermostat. This ought to assist heat up the water. Transform the breaker back on and also examine if the trouble has been dealt with.

 

Call A Professional:

If after replacing all defective parts as well as resetting your temperature, the water heater still isn't working, you may need to get in touch with a professional plumber for a professional opinion. The problem with your heater could be that the hot and cold taps have been switched or it may be undersized for the quantity of warm water required in your house. Whatever the instance might be, an expert plumber would help address the trouble.

 

Final thought

Water heater problems are not constantly significant. A number of them are because of minor concerns like a blown fuse or damaged heating element. Replacing the damaged components ought to do the trick. However, if you are still incapable to solve the problem, give a call to your local plumber to find to get it repaired.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Hopefully you enjoyed reading our piece on No Hot Water — Water Heater Repair. Thanks for taking time to read our post. Sharing is caring. You just don't know, you will be doing someone a favor. I am grateful for your time. Please stop by our site back soon.

Get An Estimate